How Do I Connect My Printer Using Wi-Fi®?

0
110
Connect My Printer Using Wi-Fi

Wireless Direct

Wireless Direct allows you to Connect My Printer Using Wi-Fi to your mobile or computer device directly, without having the need for a router or access point. The printer acts as an access point for Wi-Fi.

  1. Verify your Wireless Direct settings of the printer. When connecting to mobile devices, you must use a Windows PC or Mac to confirm the settings.

For Windows PCs – Connect My Printer Using Wi-Fi

Connect the computer and printer using a USB cable. Open your printer Setting Tools on your computer and select the”Communication Settings” button. Verify that the Wireless Direct option is select as [Selected Interface] In the [General] tab. (This is the default setting for factory settings.)

Read the FAQ “Using to use the Communications Settings (for Windows 10)” for more details on how to use the Communication Settings.

For Mac Computers – Connect My Printer Using Wi-Fi

Connect your printer to your computer via a USB cable. Open your Printing Setting Tools on your PC, and ensure that [WirelessDirect] has turn on in the tab [Wireless LAN]. (This is set as the default setting for factory settings.)

Check out the FAQ “Using the Printer Setting Tool (for Mac)” for more information about this Setting Tool for Printers. Setting Tool.

  1. Hold and press your wi-fi (Wi-Fi) switch on the printer for a second, to activate the WiFi function.

Its Wi-Fi (Wi-Fi) indicator will begin blinking in blue at least each three-second interval.

  1. Use your computer or mobile device to select the SSID of your printer (“DIRECT-*****_PJ-773” These stars “*****” are the last 5 No. of Digits are the product serial number) and enter the password (“773*****”).

Once the connection has establish when the connection is establish, the Wi-Fi (Wi-Fi) indicator will blink in blue with Less Hassle & Hard Work.

  • If you hit the “Wi-Fi” (Wi-Fi) button for more than 5 seconds the printer will go into the WPS mode, and any connection made using Wireless Direct will fail.
  • You can alter the printer’s network settings by using The Setting Tool for the Printer. Setting Tool.
  • This Printer Setting Tool will also allow users to apply network settings to several printers.
  • The serial number is at the bottom of your printer or inside the cavity for the battery.
  • It is impossible to access the Internet by using Wi-Fi while you are using Wireless Direct. For access to the Internet make use of an Ethernet connection (when the computer is connected) or connect in the Infrastructure mode.

Infrastructure Mode – Connect My Printer Using Wi-Fi

The mode of infrastructure lets you join the printer with a mobile or computer device using a router or Wi-Fi access point.

Before You Begin – Connect My Printer Using Wi-Fi

  1. The first step is to set the Wi-Fi settings on your printer so that it can communicate with your router/Wi-Fi access point. Once the printer has been configured the way you want it, any devices or computers connected to your network will be able to gain connection to the printer.
  2. If you intend to connect your printing device to the Wi-Fi internet, then we suggest that you consult the administrator of your system prior to installing it. You should confirm the Wi-Fi settings prior to you beginning the installation.
  • For setting the Wi-Fi settings If you are unsure of whether the connection to Wi-Fi on the printer is not clear Set your Wi-Fi settings for the printer.
  • Verify that the printer is shut off.
  • When you hold your button for the Feed (Feed) button then press the Power (Power) button three times. After that, Release the Feed (Feed) button.
  • The Power indicator begins blinking in orange.
  • Click the “Feed” button at least once.
  1. For the best outcomes from your daily document printing, place the printer as close to the WiFI access point or router as you can with the most minor obstructions. The presence of large objects or walls between both devices, as well as interference with other electronic devices, may impact the speed of data transfer for your files.

Connecting Your Printer To The Wi-Fi Access Point or Router

  1. In the first place, you need to first write in first the SSID (network names) along with the username (network password) of your router or Wi-Fi access point.
  2. Connect the computer and printer to each other.
  3. Click and hold on the WI-FI (Wi-Fi) button of your printer for a minute to switch the WiFi function on.

This Wi-Fi (Wi-Fi) indicator begins blinking blue each three-second interval.

  1. Set your Infrastructure mode settings for the printer.

For Windows PCs – Connect My Printer Using Wi-Fi

Begin the printer Setting Tools on your PC, then select the”Communication Settings» button. Select [Wireless LAN [Selected Interface] on the General tab, and then choose [Infrastructure] to select [Communication Mode] under the “Wireless Settings” section of the”Wireless LAN tab.

Check out the FAQ “Using Communication Settings (for Windows)” for more details about how to use Communication Settings.

For Mac Computers – Connect My Printer Using Wi-Fi

Begin by opening the Wireless Device Setup Wizard included in the Driver Package for the Printer. Driver Package, and then follow the instructions on the screen.

If you’ve not downloaded the Driver Package for your Printer Driver Package, go to the downloads page to download the file. Click twice on the file you downloaded. You will be present with the Wireless Device Setup Wizard that can locate within the [Utilities] folder.

  1. Input into the SSID that you recorded or select [Search] and choose your SSID from the search results.
  2. Enter the password using [Passphrase].Passphrase.

The required information is contingent on the type of authentication you choose and the encryption mode. Enter only the relevant information for the network environment.

  1. Click [ApplyApply.

If the connection between your printer and the Wi-Fi access point/router has establish The WI-FI (Wi-Fi) indicator will blink in blue. Mobile and computer devices that connect to similar networks to the printer are able to gain connection to the printer.

  • To modify other network settings To change any other network settings, you can use the Printer Setting Tool (see the FAQ: “Using the Printer Setting Tool”).
  • For connecting your device’s mobile to a Wi-Fi access point or router, choose the SSID and then enter the Wi-Fi password access point/router in order to connect your mobile device and the Wi-Fi access point or router.

WPS (Wi-Fi Secured Setup)

The settings are easily configure if your router or access point is compatible with WPS configurations and connections.

  1. The first step is to confirm that your router or Wi-Fi access point is equipped with a WPS symbol.
  2. Set your printer in the Wi-Fi access point or router. The range of your printer may vary based on the environment you are in. Follow the directions that come by your router or access point.
  3. Click the WPS button on your Wi-Fi access router then press then hold down on the wi-fi (Wi-Fi) buttons on your printer for around five seconds.

This Wi-Fi (Wi-Fi) indicator on the printer’s display flashes blue on a regular basis.

Once the connection is established When the connection is established, the Wi-Fi (Wi-Fi) indicator turns blue. Mobile and computer devices that are connected to similar networks to the printer are able to gain connectivity to the printer.

Your printer will attempt to connect with the WPS connection for approximately two minutes. When the WiFi (Wi-Fi) button remains in place for an additional five seconds during this period the printer will keep connecting for another two minutes.

Ad-hoc Mode – Connect My Printer Using Wi-Fi

Not all laptops, computers, devices, or operating systems can be able to support Ad-hoc mode.

  1. Ad-hoc mode lets you connect your printer to your mobile or computer device directly, without the need for a router or Wi-Fi access point.
  • Click and hold on your wi-fi (Wi-Fi) and switch on the printer for a minute to switch the Wi-Fi feature on.
  • Its Wi-Fi (Wi-Fi) indicator will begin flashing blue at least each three-second interval.
  1. Make use of a Windows PC or Mac to modify the AD-hoc mode setting for the printer.

For Windows PCs

Connect your printer to your computer with a USB cable. Open using the Printer Setting Tool, and then click the”Communication Settings” button. Select [Wireless LAN for [Selected Interface] under the General tab, and then select the [Ad Hoc] option for [Communication Mode] from the [Wireless Settings» under the”Wireless LAN” tab.

Check out the FAQ “Using for Communication Settings (for Windows)” for more details on communication Settings.

For Mac Computers

Begin by opening the Wireless Device Setup Wizard included in the Driver Package. Driver Package, and then follow the on-screen directions.

If you’re still not downloading the Driver Package for your Printer Driver Package, head over to the downloads page to download the driver package. Do double-click on the download file. You will be presented with the Wireless Device Setup Wizard that can be located within the [Utilities] folder.

Make use of your computer or smartphone and choose the SSID for your printer. If you’ve set your password using your Printer Settings Tool, then enter the password. Once the connection has been established The WiFi (Wi-Fi) indicator will blink in blue.

LEAVE A REPLY

Please enter your comment!
Please enter your name here